Automatic Power Factor Controller

Automatic Power Factor Controller

SYCON Automatic Power Factor Controller range with a very wide spectrum of features having Smart Switching Algorithm or FIFO switching algorithm implemented.
Read more »

Maximum Demand Controller

Maximum Demand Controller

This range includes various models with Three Trip Outputs & One Alarm Output implemented for fine demand control.
Read more »

Protection Relay

Protection Relays

The range includes motor protection relays, earth leakage relays, earth fault relays, under-current/over-current relay, under-voltage/over-voltage relay, neutral fault relay.
Read more »

Digital Panel Meter

Digital Panel Meters

The range includes single phase voltmeter / ammeter, three phase voltmeter / ammeter, frequency meter, multifunction meters, V-I-F / V-A-F meter and V-I-PF meter.
Read more »

Panel Accessories

Panel Accessories

This range includes various model of Thyrister Module , Series Reactor, Panel Ct, Timers etc
Read more »

SYCON 61XX Thyrister Module

SYCON 61XX Thyrister Module

To solve limitations of capacitor switching by contactors, SYCON has come up with thyristor switching modules. These modules are switched by zero crossing detection algorithm.
Read more »

SYCON 770X Earth Leakage Relay

SYCON 770X Earth Leakage Relay

SYCON 770X Earth leakage Relay continuously detects the leakage current with the help of CBCT (Core Balance Current Transformer.) The CBCT is mounted externally. The current carrying cables (it may be 3 phase supply or 1 phase supply) are passed through the CBCT. CBCT detects the level of current and trip the device at set current & time.
Read more »

1 2 3 4 5 6 7

Domain Expertise

Sycon (Systems & Controls) is a group of engineers with a perfect blend of experience and enthusiasm. It has a mission to offer the latest high end technology to the industry. From last 20 years, it has been serving to the industry with all its technical needs in electrical system automation. Since the inception, it has provided many break-through solutions in the field of industrial control using micro-controller technology. The group has its own Research and Development laboratory where it continuously works on new product ideas as well as on the old product range to add new features to it. This gives us an advantage of being flexible enough to change the design according to the needs of customers.

As discussed earlier our core expertise is electrical engineering solutions. This is being applied to fields such as motor protection, power quality improvement (power factor, harmonics etc.), and electrical load management.

Domains

Motor Control & Protection

We have been working in this field since last two decades and have given many solutions to the industry as well as to the society. Following are some of the various products and projects on which we have worked on.

Project Year Type Details
Motor Auto-switch 1989 Product This is an automation as well as protection device developed mainly for agricultural pump motors. This product is used to start the motor automatically with a programmed sequence when electric supply resumes. It gives protections like SPP and dry-run. This is running successfully in the market till date.
Motor Protection Relay 1991 Product This was a protection relay for the industrial motors. It gave protection against overload, SPP and dry-run. This was a product based on analog electronics.
Feed Mill Speed Control 1991 Product This was a motor speed control project developed for a cattle feed mill. Based on the load (sensed by motor current) of the mixer unit, the speed of the conveyer motor was controlled.
Dual Speed Control of Motor 1994 Product This was a motor speed control project developed for a spinning mill. Based on the dimension of the reel, the speed of the winding motor was controlled.
Automatic Changeover 1995 Product This was an automation product. Based on the load (sensed by motor current) an automation changeover from star to delta or vice versa was done.
Motor Protection Relay 1991 Product This was a protection relay for the industrial motors. It gave protection against overload, SPP and dry-run. This was a product based on analog electronics.
2004 An advanced version with computation of thermal current inverse characteristics.
2008 A more advanced version with attractive small case and more features.
Motor Soft Starter 1998 Product This motor soft starter was designed sp that it was acting as an energy saving device also.

There are many motor protection and control products running successfully in the market which are designed and manufactured by us.

Power Quality Improvement

Similar to motor protections, we are working in this area for last two decades. We have been successfully manufacturing various models of automatic power factor controller.Following are some of the various products/projects on which we have worked on.

Project Year Type Details
Combinational Capacitor Controller 1989 Product Many new features are being added in this instrument.
1991
1998 to till date This was the first time in India to use microprocessor technology for this application.
Automatic Power Factor Controller 1995 Product This was a motor speed control project developed for a cattle feed mill. Based on the load (sensed by motor current) of the mixer unit, the speed of the conveyer motor was controlled.
Static VAR Compensator 2007 Product This was a motor speed control project developed for a cattle feed mill. Based on the load (sensed by motor current) of the mixer unit, the speed of the conveyer motor was controlled.
Active Harmonic Filter 2008 Product This was an academic project (Bachelor of Engineering, Walchand College of Engineering, Sangli) guided by our experts.

There are many automatic power factor controller models running successfully in the market which are designed and manufactured by us.

Electrical Load Management

We have been successfully manufacturing various models of load/demand controllers since last 10 years.Following are some of the various products/projects on which we have worked on.

Project Year Type Details
Maximum KVA/KW Demand Controller 2000 to till date Product This is automation product, running successfully in many industries and saving thousands of rupees. It controls the KVA or KW demand so that it does not exceed the demand allotted by the electricity board. This saves the penalty which one must give to electricity board if it fetches extra KVA/KW than allotted by electricity board.
2006 Another version of KVA demand controller with Time of Day (ToD) facility.
2008 Another version of KVA demand controller with predicted demand facility.

News and Announcements

  • Currently there are no news to diaplay!

Downloads

Downloads coming soon...

Contact

Systems & Controls (Sangli) Pvt. Ltd.

C-24, MIDC, Miraj 416410
Sangli, Maharashtra, India

Phone: +91 233 2644765 / 2644320
Fax: +91 233 2645053
E-mail: info@sycon.co.in